EN10 Epon Ont 1GE für FTTX -Lösungen
$8-9.5 /Piece/Pieces
Zahlungsart: | L/C,T/T,Paypal |
Incoterm: | FOB,EXW |
Minimum der Bestellmenge: | 1 Piece/Pieces |
Transport: | Ocean,Land,Express,Others |
Hafen: | shenzhen |
$8-9.5 /Piece/Pieces
Zahlungsart: | L/C,T/T,Paypal |
Incoterm: | FOB,EXW |
Minimum der Bestellmenge: | 1 Piece/Pieces |
Transport: | Ocean,Land,Express,Others |
Hafen: | shenzhen |
Modell: EN10
Marke: Scodeno
Herkunftsort: China
Connector Style: SC/UPC (SC/APC optional)
Fiber Style: Single mode
Wavelength: TX:1310 +/-20nm RX:1490 +/-10nm
PON Interface Receiving Rate: 1.25Gpbs
Dimension: 110mm x 100mm x 23mm(L×W×H)
EN10 Epon Ont 1GE für FTTX -Lösungen
EN10 E Pon Ont ( 1GE ) Spezifikationen
Version |
Date |
Author |
Reviewers |
Remark |
V1.0 |
2017/2/18 |
|
|
Shall not disclose to any third party |
|
|
|
|
|
|
|
|
|
|
Inhalt
EN10 Terminalgeräte sind für die Erfüllung von FTTH- und Triple Play -Service -Bedarf an festen Netzbetreibern oder Kabelbetreibern konzipiert. Die Box basiert auf der ausgereiften EPON -Technologie, die ein hohes Leistungsverhältnis zum Preis hat. Sie sind sehr zuverlässig und leicht zu warten, mit garantierten QoS für einen anderen Service. Und es entspricht vollständig mit technischen Vorschriften wie IEEE802.3AH und technischen Anforderungen von EPON -Geräten (v2.1 und über der Version) von China Telecom.
EN10 ist die terminale Ausrüstung des FTTH -Modus, die für Innenräume ausgelegt ist Anwendungen. Spezifische Anwendung bezieht sich auf Bild 1-1
Bild 1- 1 EN10 Products Network Diagramm
EN10 Produktfigur als Bild 2-1
Bild 2-1 EN10 Produktfigur
Tabelle 2-1 Beschreibung EN10 Ausrüstung Schnittstelle
Port Type |
Function |
PON port |
Connect PON port with internet by SC type, single mode optical fiber cable |
LAN port |
RJ45Port connects to local internet, 1 GE port automatically |
PWR port (DC12 V) |
Connect with power adapter |
Power turn on/off |
Power turn on/off |
Tabelle 2- 2 EN10 LED -Erklärung
Indicators |
status |
Description |
POWER |
Light on |
ONU power supply normally |
Light off |
ONU no power supply |
|
PON |
Light on |
ONU link active |
Flash |
ONU manage to link |
|
Light off |
ONU receiving power rate lower than optical receiver sensitivity |
|
LOS |
Blink |
Device does not receive optical signals. |
off |
Device has receivedoptical signal. |
|
LAN |
Light on |
network port linked, but no data transmitting |
Flash |
network port data pass |
|
Light off |
ONU no power supply or internet cable unlink |
3.1 Physikalische Struktur, Umgebung und elektrische Parameter
Tabelle 3-1 EN10 Spezifikation und Arbeitsumgebung
Parameter |
Nominal |
Dimension |
110mm x 100mm x 23mm(L×W×H) |
Net weight |
0.3kg |
Typical power consumption |
<5W |
Noise |
None |
Cooling style |
Naturally cooling |
Power supply |
12V DC(By external AC/DC adapter) |
Installation style |
Support PC, wall mount or put inside of information box. |
Environment |
0~45℃ |
Atmospheric pressure |
70~106Kpa |
MTBF |
50,000hours |
MTTR |
30minutes |
Parameter |
Nominal |
3.2 E -PON -Schnittstellenspezifikationen
Tabelle 3-2 EN10 E PON-Schnittstelle
Parameter |
Nominal |
Connector style |
SC/UPC (SC/APC optional) |
PON quantity |
1 |
Fiber style |
Single mode |
Wavelength |
TX:1310 +/-20nm RX:1490 +/-10nm |
PON interface standard |
IEEE802.3ah |
PON interface receiving rate |
1.25Gpbs |
PON interface transmitting rate |
1.25Gpbs |
Output optical power |
Min: 0dBm Max: +5dBm |
Opticalreceiver sensitivity |
Precede -27dBm |
The length of the optical link |
Max 20km |
Unterstützen Sie mehrere VLAN
Unterstützen Sie Netzwerksturmkontrolle.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.